SoundPRO - Soundproof roll






























































- 1
- 2
- 3
- 4
- >
- >|
One roll has 7 m² square (length 5 m, width 1,4 m, thickness 12 mm)
- 9999999171.00
- Life time:Not limited
MaxForte-SoundPRO is a new generation material created on the basis of our know-how in the field of acoustical engineering and our expertise in mounting works. That’s why MaxForte-SoundPRO not only absorbs sound effectively but is also easy to mount. This material features a minimum thickness of 12 mm and provides the maximum protection against the airborne and impact noises. MaxForte-SoundPRO is indispensable in small apartments where every centimeter counts! This material is absolutely environmentally friendly: it is free of adhesives and other chemicals. MaxForte-SoundPRO is ideal for all kinds of premises including the apartments, the kindergartens and the schools. This material also serves as a fireproof insulation (since it is absolutely non-flammable) and a heat insulation!
Specifications
MaxForte-SoundPRO has successfully passed the certification test at NIISPh (according to GOST 27296-87 "Noise control in building. Sound insulation of enclosures. Methods of measurement.”) The rolls of material made of alumina-silica fibers provide a high increase in sound insulation of any structures and fully comply with the requirements of the Building Codes and Regulations (SNiP) “Noise protection” dated March 23, 2003. MaxForte-SoundPRO is ideal for sound insulation of ceilings, walls and floors as well as of partitions and pipes. MaxForte-SoundPRO can be used both in the framed structures and the frameless options of sound insulation!
| ![]() |
Application
- Thin sound insulation of ceiling. MaxForte-SoundPRO should be attached to the ceiling with the expansion anchors and covered with drywall. The structure is 2-3 cm thick.
- Thin sound insulation of walls and partitions. MaxForte-SoundPRO rolls should be hung on the walls like a carpet and then covered with drywall. The structure is 2-3 cm thick.
- Floor soundproofing. Rolls of material should be unrolled over the floor and bent to the walls. Then the screed should be poured and the edges of the material should be cut off along the perimeter.
- Sound insulation of pipes. Due to the increased flexibility and elasticity, MaxForte-SoundPRO is convenient for sound insulation of pipes and air ducts of any diameter!
Properties and advantages
- The extremely environment-friendly material: no phenol, no odor, no toxins!
- MaxForte-SoundPRO significantly improves sound insulation of any structures against airborne and impact noises.
- Hydrophobic behavior: the rolls are moisture resistant. This material is rot-resistant.
- Absolutely non-flammable material. Increased fire resistance.
- Low thermal conductivity. MaxForte-SoundPRO can be used as a heat-insulating material at any temperature.
- This material does not attract insects or rodents. Mold and fungus resistant.
- Easy and quick mounting in premises!
Acoustic values
- MaxForte-SoundPRO features the excellent acoustic properties: it enables a high sound absorption coefficient αW at the entire range of the frequencies (including the low frequencies).
- It belongs to the sound absorption class "A" (which is the highest of five possible).
- NRC (Noise Reduction coefficient) = 0,85
EVEN IN A THIN CONSTRUCTION WHICH IS 2-3 CM IN THICKNESS, MAXFORTE SOUNDPRO WILL REDUCE THE NOISE BY 3-4 TIMES!
IMPACT NOISE REDUCTION INDEX ΔLnw = 34 DB!
Mounting technique
MaxForte-SoundPRO mounting technique is simple as much as possible! Material in rolls can be quickly and unerringly mounted by any worker. Mounting instructions are posted in the section "Mounting layouts" of website. Please contact with our experts for additional advice.
Related Products
ECOSlab - Soundproof slab
The MaxForte-ECOslab sound-absorbing material is made of 100% volcanic rock (free of impurities, slag or blast-furnace wastes) in the form of slabs. These slabs feature the excellent acoustic properties and due to this can be successfully used for sound insulation of the premises which are the most difficult for soundproofing, such as: the multiplex cinemas, the recording studios, the listening rooms, the home theaters, etc.
ECOAcoustic Slab - Soundproof slab
MaxForte-EcoAcoustic sound-absorbing slabs are made from 100% polyester (polyester fibers) without the addition of adhesives. An innovative technology of thermal bonding (polyester fibers melting) is used for shaping. The material is made on modern equipment by SIMA (Italy) exclusively from primary raw materials. EcoAcoustic is absolutely safe for human health: the slabs are free of the harmful substances and do not emit them!
To ensure the maximum absorption of sound waves, the technology of aerodynamic layout of fibers is used with the formation of the layerless structure cloth (non-oriented arrangement of the fibers). The slabs are easy to mount since they are not inclined to splitting, crumbling or dusting. That’s why no overalls, gloves or respirator are required for working with this material.
ECOSlab Pro - Soundproof slab
The MaxForte-ECOslab Pro sound-absorbing material is made of 100% volcanic rock (free of impurities, slag or blast-furnace wastes) in the form of slabs. These slabs feature the excellent acoustic properties and due to this can be successfully used for sound insulation of the premises which are the most difficult for soundproofing, such as: the multiplex cinemas, the recording studios, the listening rooms, the home theaters, etc.
MAXFORTE SEALANT
MaxForte vibroacoustic sealant is intended for sealing seals, joints and holes in soundproofing of walls and ceilings as well as in the structures of "floating" and joisted floors. Due to the low modulus of elasticity, the sealant shows the excellent vibroacoustic properties and acts as a damping layer significantly reducing the vibration load between the building structures.
MAXFORTE SOUNDFLEX SOUNDPROOFING FOAM
MAXFORTE SoundFlex is a new generation resilient construction foam specially designed for soundproofing. This product features high density and low expansion. SoundFlex foam is highly resilient, stretchable and capable to restore the original shape after being compressed. Thanks to all these, the excellent vibroacoustic properties of MaxForte SoundFlex are ensured! This product acts as a damping layer and, due to this, significantly reduces the vibration load between the building structures.
MAXFORTE MEMBRANE SM
The MaxForte membrane SM (Self Adhesive) is an innovative state-of-the-art ultra-thin material (which is only 3.7 millimeters in thickness). The MaxForte viscoelastic membrane is a high-density synthetic polymer-based material free of bitumen or raw rubber. Thanks to such a composition, the membranes are elastic, resilient, strong and durable.
ECOSlab Slim - Soundproof slab
The MaxForte-ECOslab Slim sound-absorbing material is made of 100% volcanic rock (free of impurities, slag or blast-furnace wastes) in the form of slabs. These slabs feature the excellent acoustic properties and due to this can be successfully used for sound insulation of the premises which are the most difficult for soundproofing, such as: the multiplex cinemas, the recording studios, the listening rooms, the home theaters, etc.
MAXFORTE MEMBRANE
The MaxForte membrane is an innovative state-of-the-art ultra-thin material (which is only 3.7 millimeters in thickness). The MaxForte viscoelastic membrane is a high-density synthetic polymer-based material free of bitumen or raw rubber. Thanks to such a composition, the membranes are elastic, resilient, strong and durable.
Soundproof electric socket - 3 sockets
Soundproof electric socket SoundBOX is used for installing electric sockets(outlets), electric switcher into soundproofing schemes. Minimal thickness allows you to install soundproof electric socket even in the thinnest soundproofing schemes.
Soundproof electric socket is made of high strength polymer, that provides long service life and high values of soundproofing.
DAMPING TAPE 100mm width
The self-adhesive tape of chemically cross-linked polyethylene foam is designed to soundproof the structure-borne noise as well as to seal and compensate the irregularities of floors, walls and ceilings at the abutments of the drywall structures frame guides.
Sound insulation for pipes MaxForte SoundPIPE
MaxForte SoundPIPE is designed for sound insulation of sewer pipes, water supply pipes, ventilation pipes, air ducts and other communications located in apartments, offices or industrial premises.



















